Step 1: Check memory usages
Step 2: Check value of
‘vm.vfs_cache_pressure’
Step 3: Change 1000 instead of 100
Step 7: Check memory usages
# free -m
total
used free shared
buffers cached
Mem: 16081
15848 232 0 379
13846
Still
memory utilization is very high.
# sysctl -a | grep
vfs_cache_pressure
vm.vfs_cache_pressure = 100
# vi /etc/sysctl.conf
vm.vfs_cache_pressure = 1000
Step 4: Make value effective
# sysctl -p
vm.vfs_cache_pressure = 1000
Set /proc/sys/vm/vfs_cache_pressure at 1000, memory usage
would usually hover around 700-900MB, but if anything needs lots of memory
(e.g. copying lots amount of data to tmpfs) it's usage would drop back to
around 100-130MB mark.
Step 5: Check memory usages
# free -m
total used free
shared buffers cached
Mem: 16081
15884 197 0 379
13850
Step 6: Run below command again
# sync && echo 3 > /proc/sys/vm/drop_caches
Meaning of above command
parameters
echo 1 > /proc/sys/vm/drop_caches # free pagecache, [OR]
echo 2 > /proc/sys/vm/drop_caches # free dentries and inodes, [OR]
echo 3 > /proc/sys/vm/drop_caches # free pagecache, dentries and inodes
sync # forces the dump
to be destructive
Step 7: Check memory usages
# free -m
total used free
shared buffers cached
Mem: 16081
1166 14915 0 4 149